Supersucker Features
General Dimensions
- 35′ (10.36 m) approximate overall length
- 12′ 10" (3.76 m) approximate overall high above the ground
- 8′ 0" ( 2.44 meter) approximate overall width
Contact Factory regarding customer supplied chassis requirements.
Vacuum System
- Positive displacement vacuum pumps with ductile iron impellers and high temperature seals provide airflow of 5000 – 6000 CFM/0-28" Hg vacuum
- Cotta, heavy-duty transfer case drive
Filtration System
- Single mode filtration enables loading of wet or dry material with no changeover required
- The reverse air pulsation system continuously cleans the 60 snap-ring type, acryliccoated filter bags
- Easy filter access on top of unit for filter bag change-out; large side door access to baghouses allows for quick bag removal
- One (1) large cyclone with large passageways for greater airflow, greater performance and greater fuel economy
Collector Body
- 18 cubic yard payload capacity
- 1/4" steel construction throughout entire body and filter chambers
- Body dumping is achieved by one heavy-duty, telescopic double-acting cylinder that provides a 51° dump angle. The body, baghouses and separator chamber hydraulically raise together, allowing for quick unloading of material
- Full opening tailgate with two lift cylinders. The hydraulic tailgate latching system is liquid tight and prevents leakage in case of hydraulic malfunction. Latches and hinges are fully adjustable
Additional Features Available
- High-Pressure Wash Down Systems
- Vacuum Relief Valves, Electric and Manual
- Rear Worklights
- Stainless Steel Components
- Debris Tank Vibrator
- Tailgate Auger System
- Strobe Lights
- Tool Box
- Decant Valves
- Drain Valves
- On Top of Body Railings
- Sludge Pump Mounted on Tailgate
- Hydraulic Booms
- Gauge Packages
