Camel Features
A. Water Tanks
Constructed of 3/8" (9.5mm) rotationally molded, non-cross linked polyethylene with ultraviolet stabilizer for strength and durability, the tanks offer capacity up to 1500 gallons (5,677L) of water
B. Aluminum Tubing
Rugged aluminum tubing with available storage of up to 48' (14.6m) on rear door. Optional hydraulic fold down rack available
C. Tailgate
When closed, the tailgate is secured by a manual latch system or an optional hydraulic over-center latch system
D. Collector Body
The debris collector body is constructed of 1/4" (19mm) Exten high-strength, low-alloy, abrasion-resistant steel designed to withstand vacuum levels of 367" (93.22mm) of water. Body sizes are available that offer debris capacities of 6.5 cu yd (4.9m3), 10.8 cu yd (8.2m3) and 16 cu yd (12.2m3)
E. Super Pak Dewatering System
Coupled with the ejector plate technology, the Camel’s Super Pak dewatering and compaction system removes excess liquid through a 6" (152.4 mm) drain located on the front of the collector body
F. Storage Boxes
Customize your own storage for tools and accessories with a wide selection of different sized storage boxes
G. Hydraulic Boom
Offering a true “tube-inside-the-tube” design for smooth and precise operation, the Camel’s 8' hydraulic telescopic boom is capable of providing a vertical lift up to 22' (6.71m) , extending up to 26' (7.92m), and lifting up to 1000 lbs (454 kg). And the 8" (203.22mm) I.D. vacuum system comes with a reinforced elbow to ensure strength and durability.
For operator convenience, all boom positioning functions can be performed using the standard removable wired pendant or an optional wireless remote control
H. Hose Reel
The Camel’s hose reel can be front or mid-mounted on the unit. The front-mounted hose reel (as shown) offers manual 180º rotation and has capacity up to 1000' (304.8m) of 1" (25.4mm) hose. The mid-mounted hose reel, which can hold 600' (182.9m) of 1" (25.4mm) hose, features hose reel tensioning and automatic level wind system to make it the industry’s easiest reel to operate
I. Front Mounted Control Console
A front-mounted control console makes it easy and safe to operate many functions including the Camel’s water and vacuum pumps; PTO on/off switches; water flow control and pressure gauge; electronic engine throttle; reel directional valve and speed controls; and pendant and handgun connections. For even greater convenience, a wireless, remote control system is also available
J. CAN Bus Wiring
Simple CAN bus wiring system with LED digital display screen replaces individual analog wiring systems and offers quick, convenient troubleshooting to reduce vehicle downtime
K. Single Engine Design
Lower sound levels, reduced maintenance and less fuel consumption result from the Camel’s single engine design. This unique design also allows the vacuum, water and hydraulic pumps to operate efficiently while transmission is in NEUTRAL
L. Unique Ejector Plate Unloading
The Camel is the industry’s only combination unit that features Super Products’ ejector plate unloading system. This system safely and effectively removes all debris from the collector body with minimal cleanup, and an internal body flush-out system makes cleanup fast and easy at the dump site. To prevent over filling the collector body, an automatic stainless steel dual float ball system is in place.
For operators who prefer a dump body unit, the Camel is also available with the standard “tip-to-dump” method that raises the body up to a 50º angle with a telescopic hydraulic cylinder. All controls for discharging debris are located curbside of chassis cabsized storage boxes.
